RX-103 is a modified silicone fluid of medium viscosity and its special chemical structure imbues it with the advantages of silicone fluids and mineral oils. It is mainly used for die casting release agent. Compared to conventional silicone fluid, it is better in case when finished components are to be printed, painted, bonded or coated. Even a small amount of release agent can be used for an excellent release effect. It results in convenient and accurate reproduction of all surface details of the molded article. RX-103 shows superior film forming properties.
Silicone Oil is a modified silicone fluid of medium viscosity whose special chemical structure imbues it with the benefits of silicone fluids and mineral oils.
Silicone Oil is widely used for die casting release agent. It is superior to conventional silicone fluids when the finished parts are subsequently to be painted, printed, coated or bonded. An outstanding release effect is even obtained when extremely small amounts of the release agent are used. The result is an easy, accurate reproduction of every surface detail of the molded article. RX-103 exhibits excellent film forming properties.
|Typical general characteristics||Inspection Method||Value|
|Appearance||Clear, colorless to yellowish|
|Viscosity, kinematic at 25 C||900 - 1500 mm/s|
|Viscosity, dynamic at 25 C||800 - 1400 mPa.s|
|Refractive index at 25 C||Approx. 1.4640|
|Density at 25 C||DIN 51757||0.912 g/cm|
|Volatility||5 g / 2 h / 230 C||< 1.5 %|
Developed and Managed by Infocom Network Private Limited.